ZKTeco SpeedFace M1 User Manual

SpeedFace M1/M2 User Manual
Page | 38 Copyright©2020ZKTECO CO., LTD. All rights reserved.
5.3.1 Adding Wi-Fi Network
If the desired Wi-Fi network is not in the list, you can add the Wi-Fi network manually.
Tap Page Down and Add Wi-Fi Network.
Enter the parameters of Wi-Fi network. (The added network must exist.)
After adding, find the added Wi-Fi network in list and connect to the network in the above way.
5.3.2 Advanced Options
This is used to set Wi-Fi network parameters.

ZKTeco SpeedFace M1 Specifications

General

Brand	ZKTeco
Model	SpeedFace M1
Category	IP Access Controllers
Language	English