SpeedFace M1/M2
User Manual
Page | 34 Copyright©2020ZKTECO CO., LTD. All rights reserved.
Note: During the privilege assignment, the main menu is on the left and its sub-menus are on the right.
You only need to select the features in sub-menus. If the device has a role enabled, you may assign the
roles you set to users by clicking User Mgt. > New User> User Role.
If no super administrator is registered, the device will prompt "Please enroll super admin first!” after
clicking the enable bar, as shown below.
To Next Page
Loading...
Need help?
General
