ZMODO ZMD-DT-SCN4 User Manual

H.264 Super Digital Video Recorder User Manual
22
Picture 3.11 Tour
2) The Calls of Cruise between Points
In Picture 3.8, click Page Shift button, enter PTZ control menu as shown in Picture 3.10. Please
input the number of cruise in the value blank, then click Cruise between Points button, PTZ begins to
work on the cruise line. Click Stop button to stop cruise.
3、pattern
PTZ also can work on the preset scan line repeatedly.
1）Scan setup
Step1：In Picture 3.8, click Setup button ,enter Picture 3.12.
Step2：Click Scan button，the input proper value in the scan value blank;
Step3：Click Start button, enter Picture 3.8，here you can set the following items: Zoom,
Focus, Aperture, Direction and so on. Click Setup button to go back Picture 3.12；
Step4：Click End button to complete setup. Click the right button of the mouse to exit.
Picture 3.12 Pattern
2) Scan Calls
In Picture 3.8, click Page Shift button, then enter PTZ control menu as shown in Picture 3.10.
Please input the number of scan in the value blank , then click Scan button，PTZ begins to work on
Cruise Button
Cruise Line Blank
Preset Points Blank
Scan value blank
Scan Button

ZMODO ZMD-DT-SCN4 Specifications

General

Brand	ZMODO
Model	ZMD-DT-SCN4
Category	DVR
Language	English