For WEP Authentication:
You can accept the default, WEP-Auto or select one of the available options.
Select WEP-Open to use Open System authentication. Select WEP-Shared to
use Shared Key authentication.
For WPA-PSK/WPA2-PSK Authentication:
You can select WPA-PSK/WPA2 PSK if your devices support both
authentication methods. Optionally, select WPA-PSK or WPA2-PSK if all
devices on your network support only one of these authentication methods.
• Encryption
Select an Encryption method that corresponds to the Authentication method
that you chose.
If you chose a WPA-PSK/WPA2-PSK Authentication method:
• Accept TKIP/AES encryption (the WPA-PSK/WPA2-PSK default), which
supports dynamic encryption keys using TKIP or AES algorithms, or
choose one of the other options.
• Select AES if you chose WPA2-PSK for the authentication method.
• Select TKIP if you chose WPA-PSK for the authentication method.
• In the Preshare Key field, enter a 26-character key.
If you chose a WEP Authentication method:
• Select WEP-Auto encryption if you chose both WEP-Open and WEP-Shared
authentication.
• Select WEP-Open to use Open System authentication.
• Select WEP-Shared to use Shared Key authentication. With Shared Key,
both sender and receiver use a WEP key for authentication.
• Key Format
Select Hex if all the wireless devices in the network are Zoom products.
Otherwise, select ASCII. Although Zoom products support both Hex and ASCII,
we recommend using Hex.
• Encryption WEP Key 1, 2, 3, 4
If you selected Hex format and you chose a 128-bit key length, 26
hexadecimal values are required. Write the 26-hexadecimal key in the space
below for future reference, and then enter it in the Key 1 box.
— — — — — — — — — — — — —
— — — — — — — — — — — — —
If you selected Hex format and you chose a 64-bit key length, 13
hexadecimal values are required. Write the 13-hexadecimal key in the space
below for future reference, and then enter it in the Key 1 box.
— — — — — — — — — — — — —
40 Travel Router with Wireless-N User Manual
To Next Page
Loading...
