Zoom R16 - Insert Effect Insertion Position; Selecting Input Sources and Effect Placement; Examples of Effect Insertion Positions

Insert effect>Patch sel>Input source Insert effect>Patch sel>Input source
49
50
Insert effect insertion position
You can change the insert position of the Insert Effect.
This menu is only for Insert Effect.
HINT
Change the insertion place of the insert effect.
When a project is at the default status, the insert
effect is inserted on INPUT 1.
To change this place, select an INPUT SOURCE at
Step 4:
NOTE
• You can select a single INPUT (1~8) only when
you have chosen the CLEAN, DISTORTION,
ACO/BASS SIM, BASS or MIC algorithm.
• You can select Track 1-8 or Track 9-16 only when
the 8 x COMP EQ is chosen as the algorithm.
• INPUT 1-8 can be selected only when the 8 x
COMP EQ algorithm has been chosen.
• After you select an insertion place, if you change
the algorithm to 8 x COMP EQ, the insertion place
will be changed to Input 1-8, Track 1-8 or Track
9-16 (depending on the previous setting).
• To insert into a single monaural track output, you
must select TRACK 1 ~ TRACK 8. To insert into
a two monaural tracks or a stereo track, you must
select TRACK 1/2 ~ TRACK 15/16. If you want
to insert before the MASTER FADER, you must
select MASTER.
Effect
3
Press[ ].
5
Change
input place
Set source of input into effect.
Input Source
INPUT8
Input Source
TRACK8
Press [ENTER].
On display Insert place
Input
Mixer input
Input1~Input8
Single mixer input
Track1,Track2
Output from either monaural track
1 or 2
Track1/2,
Track3/4
Output from either stereo track or 2
monaural tracks
Master
Just before the [MASTER] fader
With 8 x Comp EQ setting case
Track1-8
All track 1–8 outputs
Track9-16
All track 9–16 outputs
IN**
Inserted in INPUT **
IN**/**
Inserted in INPUTS ** and **
TR**
Inserted in TRACK **
TR**/**
Inserted in TRACKS ** and **
IN*~**
Inserted in INPUTS * to **
TR*~**
Inserted in TRACKS * to **
MASTER
Inserted in the master track
Effect on/off switch.
press [ENTER].
If “INSERT EFFECT Off” is displayed,
1
Press [INSERT EFFECT].
CLEAN <IN1>
No.00:Standard
2
Select the algorithm/patch.
Change
patch
Change
algorithm
Current insert position
Odd-
numbered
Track
インサートエフェクトの挿入位置
Odd-
numbered
INPUT
or
Track
Even-
numbered
INPUT
or
Track
INSERT
EFFECT
L
INSERT
EFFECT
R
Even-
numbered
Track
Odd-
numbered
INPUT
or
Track
or
MasterL
Even-
numbered
INPUT
or
Track
or
MasterR
INSERT
EFFECT
Odd-
numbered
Track
or
MasterTrack
(L)
Even-
numbered
Track
or
MasterTrack
(R)
INPUT1
or
Track1/9
INPUT2
or
Track2/10
INSERT
EFFECT
1
INSERT
EFFECT
2
Track1/9
Track2/10
INPUT2
or
Track2/10
INSERT
EFFECT
8
Track2/10
Insert position of insert effect
Inserting the INSERT EFFECT into 2 monaural inputs
(DUAL algorithm)
Inserting an INSERT EFFECT into a stereo input
(Stereo Master algorithm)
Inserting an INSERT EFFECT on 8 inputs
(8 x COMP EQ algorithm)
Select .
4
Press [ENTER].
Input Source
INPUT1
Change
input place
No.00:Standard
>INPUT SOURCE
Change
menu
>INPUT SOURCE
6
Press[ ].
CLEAN <TR8>
No.00:Standard
Current insert position