Zoom V6 User Manual

Using the EFFECT section
This section adds reverb, distortion or another effect to the original sound to change its tone.
1.
Press .
The EFFECT section is activated, and
lights.
2.
Turn .
This selects the effect.
3.
Turn .
This adjusts the effect.
Effect Explanation ADJUST function
DISTORTION Distorts the voice heavily Distortion amount
TELEPHONE Retro-sounding telephone emulation Frequency band affected
BEAT BOX
Adds impact for beat boxing.
This adds power to kick and snare sounds
while emphasizing the sharpness of high
hats. A moderate amount of compression
also evens out the volumes of kick, snare and
high hat sounds, which tend to vary greatly.
Boost amount
PLATE* Plate reverb simulation
Reverb duration and mix
amount
ROOM* Tight reverb that simulates room acoustics
Reverb duration and mix
amount
HALL* Dense reverb that simulates hall acoustics
Reverb duration and mix
amount
CHORUS Thick, gentle chorus Effect mix level
DELAY+REVERB* Combines delay and reverb
Reverb duration and mix
amount
ECHO Crisp short delay that brings out clarity Effect mix level
DELAY**
TIME
Clear-sounding delay that allows detailed pa-
rameter settings
Delay time
FEEDBACK Feedback amount
MIX Effect mix level
*This produces a stereo effect. (Stereo output is possible from the PHONES OUT jack.)
**The DELAY effect is set by its TIME, FEEDBACK and MIX settings.
21

Zoom V6 Specifications

General

Type	Vocal Processor
Looper	Yes
Inputs	1 x XLR
Phantom Power	Yes
USB	Yes
Computer Connectivity	USB
Input Channels	1
Output Channels	2
Bit Depth	24-bit
Sample Rate	44.1 kHz
Headphone Output	Yes
Input	XLR
Power	9V DC
Power Source	9V DC power supply (included)
Outputs	2 x XLR