Zoom V6 User Manual

Making other settings
Setting the standard pitch for voices and harmonies
This adjusts the standard pitch used for correcting vocal pitch and adding harmony.
1.
While pressing and holding , set to ON.
After
appears on the display, the current setting value appears.
2.
Press or .
Set the standard pitch in 1Hz intervals (the default is 440 Hz).
435 Hz
445Hz
What is the standard pitch?
The pitch used for “A” (La) is expressed in hertz (Hz).
Vocal and harmony pitches can be matched to the instruments being played together by setting the stan-
dard pitch used by the
to the same pitch.
3.
Press .
The display blinks rapidly, the setting is saved, and the
starts normal operation.
HINT
Press to cancel the setting change.
29

Zoom V6 Specifications

General

Type	Vocal Processor
Looper	Yes
Inputs	1 x XLR
Phantom Power	Yes
USB	Yes
Computer Connectivity	USB
Input Channels	1
Output Channels	2
Bit Depth	24-bit
Sample Rate	44.1 kHz
Headphone Output	Yes
Input	XLR
Power	9V DC
Power Source	9V DC power supply (included)
Outputs	2 x XLR