Zte ZXHN H3601 - Configure the SNTP

ZXHN H3601 Maintenance Management Guide
5.7 Configure the SNTP
The section describes how to configure SNTP. SNTP provides the parameters of SNTP
configuration features.
Steps
1. On the main page of the ZXHN H3601, select Internet > SNTP to the SNTP page,
see Figure 5-24.
Figure 5-24 SNTP Configuration Page
2. Configure the SNTP parameters.
Table 5-17 lists the SNTP parameters.
Table 5-17 Parameter Descriptions for the SNTP
Parameter Description
Time Zone Time zone.
NTP Server1-NTP Server5
IP address of the primary/secondary/third/fourth/fifth NTP
server.
Poll Interval
Interval of time synchronization.
Unit: second.
Automatically Adjust Clock For
Daylight
Enable or disable the automatically adjust clock for daylight
function.
DSCP
To ensure the QoS of communication, DSCP (
Differentiated Services Code Point) encodes the 8 flag
bytes in the IP header of data packets to classify service
5-24 SJ-20200429083356-004 | 2020-07-23(R1.0)