Zte ZXHN H3601 - Configure the Port Binding; Configure the Mulitcast; Configure the IGMP

5 Configure the Internet
Parameter Description
types and distinguish service priorities.The value range of
DSCP is 0~63 and each DSCP code value is mapped to a
defined PHB (Per-Hop-Behavior) code.
3. Click Apply button to apply the changes.
5.8 Configure the Port Binding
The section describes how to configure Port Binding. Port Binding provides the
parameters of Port Binding configuration features.
Steps
1. On the main page of the ZXHN H3601, select Internet > Port Binding to the Port
Binding page, see Figure 5-25.
Figure 5-25 Port Binding Configuration Page
2. Click Refresh button to get the information.
5.9 Configure the Mulitcast
5.9.1 Configure the IGMP
The section describes how to configure IGMP. IGMP provides the parameters of IGMP
configuration features.
Steps
1. On the main page of the ZXHN H3601, select Internet > Multicast > IGMP to the
IGMP page, see Figure 5-26.
SJ-20200429083356-004 | 2020-07-23(R1.0) 5-25