Zte ZXHN H3601 - Configure the System Management; Configure the Device Management

ZXHN H3601 Maintenance Management Guide
Figure 7-4 Idle Timeout Configuration Page
2. Specify the time in the Timeout text box, rang: 1-30 min.
3. Click Apply button to apply the changes.
7.4 Configure the System Management
7.4.1 Configure the Device Management
This procedure introduces how to reboot the device or restore the factory default settings.
Steps
1. On the main page of the ZXHN H3601, select Management&Diagnosis > System
Management > Device Management to the Device Management page, see Figure
7-5.
Figure 7-5 Device Management Page
2. On this page, you can perform the following operations:
 Click Reboot to reboot the ZXHN H3601 device.
 Click Factory Reset to restore the factory default settings.
7-4 SJ-20200429083356-004 | 2020-07-23(R1.0)