Zte ZXHN H3601 - Configure the Samba Service

6 Configure the Local Network
Parameter Description
Media Source1–
Media Source4
By default, the media source is /mnt, that is the root directory of the USB
device. You can change the root directory to other directory of the USB
storage device.
Note
By default, the media source is /mnt, that is the root directory of the USB device. You
can change the root directory to other directory of the USB storage device.
3. Click Apply button to apply the changes.
6.8 Configure the Samba Service
The procedure provides the parameters of samba configuration features.
Steps
1. On the main page of the ZXHN H3601, select Local Network > Samba Service to
open the Samba Service page, see Figure 6-27.
Figure 6-27 Samba Service
Table 6-19 lists the samba service parameters.
Table 6-19 Samba Service parameters
Parameter Description
Samba Service Click On to enable the samba service function manually.
Click Off to disable the samba service function.
Click Auto On After Detecting USB Storage Plugged: If
detecting USB Storage Plugged, it will enable the samba
service function automatically.
Host Name The name of samba host.
Anonymous Click On to enable the anonymous function.
Click Off to disable the anonymous function.
Samba Username/Samba
Password
It is valid only if Anonymous is disabled.
SJ-20200429083356-004 | 2020-07-23(R1.0) 6-23