Zte ZXHN H3601 - Page 68

ZXHN H3601 Maintenance Management Guide
If the DMS function is enabled on the ZXHN H3601 device, any client that supports
UPnP function can use the specified DMP (for example, windows media player) to watch
the media files or photos stored in the USB storage device.
The version of the windows media player used for DMS function must be 11 or later,
or the OS must be vista or Win 7. To enable the DMP function in OS of earlier version,
special tools, such as Intel(R) Tool for UPnP(TM) Technology or Twonky Media Manager
must be installed.
Prerequisite
The USB device is connected to open the ZXHN H3601 device.
Steps
1. On the main page of the ZXHN H3601, select Local Network > DMS/DLNA to open
the DMS/DLNA page, see Figure 6-26.
Figure 6-26 DMS/DLNA
2. Enable the DMS/DLNA function, and specify the path storing the media files. For a
description of the parameters, refer to Table 6-18.
Table 6-18 Parameter Descriptions for the DMS/DLNA
Parameter Description
DMS Click On to enable the DMS function.
Click Off to disable the DMS function.
DMS Name To create a DMS, enter the name of the DMS.
Library Rescan
Method
Library rescan method that the device supports. Normally, it is set to Auto.
6-22 SJ-20200429083356-004 | 2020-07-23(R1.0)