Zte ZXHN H3601 - Configure the LAN (Ipv6)

ZXHN H3601 Maintenance Management Guide
Figure 6-10 Port Control
2. Configure the port control parameters.
 Click All On to select all ports.
 Click All Off to cancel all ports.
3. Click Apply button to apply the changes.
6.3.2 Configure the LAN (IPv6)
The procedure describes how to configure LAN (IPv6).
The relevant information of Internet status includes Allocated Address (DHCPv6), LAN
Address Management, DHCPv6 Server, Static Prefix, Port Control and RA Service.
Prerequisite
Before configuring the prefix delegation, make sure that the prefix delegation is enabled
for the specified IPv6 WAN connection.
Steps
Check the allocated address (DHCPv6).
1. On the main page of the ZXHN H3601 device, select Local Network > LAN > IPv4
to open the Allocated Address (DHCP) page, see Figure 6-11.
6-10 SJ-20200429083356-004 | 2020-07-23(R1.0)