Zte ZXHN H3601 - Configure the Advanced Parameters of the WLAN

6 Configure the Local Network
Parameter Description
SSID Hide Set radiobox On to hide the SSID information to prevent illegal
users.
Encryption Type Select Encryption Type.
WPA Passphrase Password to connect to the wireless network. The value range is
8–63.
Maximum Clients Maximum number of users that can access the SSID. The value
range is 1-32.
3. Click Apply button to apply the changes.
Note
Private WLAN SSID Configuration(5GHz) refers to Private WLAN SSID
Configuration(2.4GHz). Guest WLAN SSID Configuration refers to Private WLAN
SSID Configuration.
6.2.2 Configure the Advanced Parameters of the WLAN
WLAN Advanced provides the parameters of WLAN Advanced configuration features.
Steps
Access Control-Mode Settings
1. On the main page of the ZXHN H3601, select Local Network > WLAN > WLAN
Advanced to the WLAN Advanced page.
2. Click Access Control-Mode Configuration the configuration page, see Figure 6-5.
Figure 6-5 Access Control-Mode Configuration Page
SJ-20200429083356-004 | 2020-07-23(R1.0) 6-5