ZXHN H3601 Maintenance Management Guide
Interface/Button Function
LAN1-LAN3 RJ-45 port: Used to connect the modem to PCs, STBs or other network devices
LAN1/LAN2 RJ-45 port, it is used to connect to the uplink access network.
Power Power supply socket: Used to connect to the power adapter
Reset Reset pinhole: During power ON period, hold on this button for more than 5
seconds to reset the current settings to the factory default.
WPS WPS Push Button
2.4 Hardware Connection
Figure 2-3 shows the devices that are connected to interfaces of the ZXHN H3601.
Figure 2-3 Cable Connection
The factors affecting the wireless network coverage range include the location of the
product, distance between the product and a wireless terminal, number of obstacles,
obstacle material and density, and interference source. It is recommended that you
place the product in accordance with the following principles to maximize the strength of
wireless signals.
The product should be far away from the objects affecting wireless signal
propagation, for example, an object with a high reflectivity such as a metallic object
or a mirror.
2-4 SJ-20200429083356-004 | 2020-07-23(R1.0)
To Next Page
Loading...
