Zte ZXHN H3601 - Configure the WLAN; Configure the Basic Parameters of the WLAN

ZXHN H3601 Maintenance Management Guide
Figure 6-1 Local Network Status Page
2. Click Refresh to refresh the information.
6.2 Configure the WLAN
6.2.1 Configure the Basic Parameters of the WLAN
The section describes how to configure WLAN basic settings.
Steps
WLAN On/Off Configuration
1. On the main page of the ZXHN H3601, select Local Network > WLAN > WLAN
Basic to the WLAN Basic page, see Figure 6-2.
Figure 6-2 WLAN On/Off Configuration
2. Table 6-1 lists the WLAN on/off configuration parameters.
Table 6-1 WLAN On/Off Configuration parameters
Parameter Description
WLAN (2.4GHz) Click On to enable the 2.4GHz wireless function.
Click Off to disable the 2.4GHz wireless function.
6-2 SJ-20200429083356-004 | 2020-07-23(R1.0)