Zte ZXHN H3601 - Check the ARP Table; Check the MAC Table

7 Configure the Management and Diagnosis
Parameter Description
Wait Time Time allowed for receiving a response in ms. If no response is received during
this period, an asterisk is displayed. If multiple asterisks are displayed, it
indicates that the corresponding node fails.
Protocol Options: UDP and ICMP.
Notice
 Please don't refresh this page while diagnosing, otherwise the diagnosis result may
be displayed unproperly.
 If a new diagnosis is triggered when the current diagnosis is still running, the device
will only respond to the new diagnosis, and the current diagnostic result will not be
saved.
7.9 Check the ARP Table
The relevant information of ARP table is shown as below.
Steps
1. On the main page of the ZXHN H3601, select Management&Diagnosis > ARP
Table to the ARP Table page, see Figure 7-19.
Figure 7-19 ARP Table Page
2. Click Refresh button to refresh information.
7.10 Check the MAC Table
The relevant information of MAC table is shown as below.
Steps
1. On the main page of the ZXHN H3601, select Management&Diagnosis > MAC
Table to the MAC Table page, see Figure 7-20.
SJ-20200429083356-004 | 2020-07-23(R1.0) 7-15