Zte ZXHN H3601 - Configure the Routing(Ipv6)

ZXHN H3601 Maintenance Management Guide
6.4.2 Configure the Routing(IPv6)
The section describes how to configure Routing(IPv6).
The relevant information of Internet status includes Routing Table, Static Routing and
Policy Routing.
Prerequisite
Before configuring routing(IPv6), make sure that the IPv6 WAN connection is created.
Steps
Routing Table
1. On the main page of the ZXHN H3601, select Local Network > Routing > IPv6 to
the Routing(IPv6) page.
2. Click Routing Table to the configuration page, see Figure 6-20.
Figure 6-20 Routing Table Page
3. Click Refresh to refresh the information.
Static Routing
1. Click Static Routing to the configuration page, see Figure 6-21.
Figure 6-21 Static Routing(IPv6) Page
6-18 SJ-20200429083356-004 | 2020-07-23(R1.0)