6 Configure the Local Network
2. Configure the static routing parameters. Table 6-14 lists the static routing
parameters.
Table 6-14 Parameter Descriptions for the Static Routing
Parameter Description
Name The name of static routing entry.
Egress WAN connection for static routing.
Prefix IPv6 address and prefix length. The value
range is 1-128.
Gateway The next-hop IP address to the destination
network.
3. Click Apply button to apply the changes.
Policy Routing
1. Click Policy Routing to the configuration page, see Figure 6-22.
Figure 6-22 Policy Routing(IPv6) Page
2. Configure the policy routing parameters. Table 6-15 lists the policy routing
parameters.
Table 6-15 Parameter Descriptions for the Policy Routing
Parameter Description
Name The name of Policy routing entry.
Egress WAN connection for policy routing
Source IP Address Source IPv6 address of the matching packets.
SJ-20200429083356-004 | 2020-07-23(R1.0) 6-19
To Next Page
Loading...
