Zte ZXHN H3601 - Configure the Login Timeout

7 Configure the Management and Diagnosis
Parameter Description
New Password Specify the new password.
Confirmed Password Confirm the new password.
3. Click Apply button to apply the changes.
User Account Management
1. On the main page of the ZXHN H3601, select Management > Account
Management to the User Account Management page, see Figure 7-3.
Figure 7-3 User Account Management Page
2. Configure the administrator account management parameters.
Table 7-2 lists the user account management parameters.
Table 7-2 Parameter Descriptions for the User Account Management
Parameter Description
Username The user name for the administrator privilege.
The default user name of the administrator privilege is
vulladmin, which can be modified.
New Password Specify the new password.
Confirmed Password Confirm the new password.
3. Click Apply button to apply the changes.
7.3 Configure the Login Timeout
This procedure introduces how to configure the login timeout.
Steps
1. On the main page of the ZXHN H3601, select Management&Diagnosis > Idle
Timeout to the Idle Timeout page, see Figure 7-4.
SJ-20200429083356-004 | 2020-07-23(R1.0) 7-3