6 Configure the Local Network
Parameter Description
WLAN (5GHz) Click On to enable the 5GHz wireless function.
Click Off to disable the 5GHz wireless function.
Roaming Limit (2.4GHz) The default value is recommended.
Roaming Limit (5GHz) The default value is recommended.
3. Click Apply button to apply the changes.
WLAN Global Configuration
1. Click WLAN Global Configuration to the configuration page, see Figure 6-3.
Figure 6-3 WLAN Global Configuration Page
2. Table 6-2 lists the WLAN global configuration parameters.
Table 6-2 Parameter Descriptions for WLAN Global Configuration
Parameter Description
Channel Channel of the wireless network. A proper channel can be selected in
accordance with the country code. Options: Auto, 1–13, default: 13.
Specifies the channel used for communication between the AP and the
wireless site, depending on the local circumstance.
Mode Options:
IEEE 802.11b Only
IEEE 802.11g Only
IEEE 802.11n Only
Mixed(802.11b/g)
Mixed(802.11g/n)
Mixed(802.11b/g/n)
Mixed(802.11b/g/n/ax)
SJ-20200429083356-004 | 2020-07-23(R1.0) 6-3
To Next Page
Loading...
