2 Product Overview
LED Color Status Description
Off The power supply is not connected or is faulty.
Red On Steady on: The system is performing self-detection or the self-
detection fails.
Flashing: Uplink connection failed or configuration synchronization
failed in agent mode.
Green On Steady on: The uplink connection is normal.
Or the connection is successful in agent mode and the configuration
is synchronized successfully.
Or the wireless uplink signal is strong in agent mode.
Flashing: WLAN terminal is in WPS accessing process.
Or the wireless uplink signal is weak in agent mode.
Green + Red On Flashing: Software upgrade progress.
Rear panel
Figure 2-2 shows the interfaces and buttons on the rear panel of the ZXHN H3601.
Figure 2-2 The Rear Panel
Interface/Button Function
USB USB 2.0 host port: Used for the USB storage device, printer or Dongle connection
SJ-20200429083356-004 | 2020-07-23(R1.0) 2-3
To Next Page
Loading...
