Zte ZXR10 5250-52TC - Set Arp-Inspection Port Limit

Chapter4ServiceConguration
ParameterDescription
untrustSetsthespeciedportsasuntrustedports.
trustSetsthespeciedportsastrustedports.
Guidelines
ThetrustedportsdonotlterARPmessages,meaningthattheDAIfunctionisdisabled.
AportcansupporttheDAIfunctiononlywhenVLANandtheport’sDAIfunctionareboth
enabled.
Default
Thiscommandsetstrustedports.
Example
Thefollowingexamplesetsport2asanuntrustedport:
zte(cfg)#setarp-inspectionport2untrust
4.19.4setarp-inspectionportlimit
Purpose
ThiscommandsetsthemaximumnumberofARPmessagesthataportprocessesineach
second.
CommandMode
Globalcongurationmode
Syntax
setarp-inspectionport<portlist>limit{<1-100>|infinite}
ParameterDescription
ParameterDescription
<portlist>Portlist.
<1-100>
ThemaximumnumberofARPmessagesthataportprocessesin
eachsecond.
infinite
ThenumberofARPmessagesthataportprocessesineach
secondisnotlimited.
Guidelines
Onlyuntrustedportssupportthelimitationconguration.ThemaximumnumberofARP
messagesthataportprocessesineachsecondislimitedbysoftwareltering.
4-377
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential