Zte ZXR10 5250-52TC - Set Protocol-Protect Alarm Threshold; Set Protocol-Protect Limit

ZXR105250SeriesCommandReference
4.32.3setprotocol-protectalarmthreshold
Purpose
Thiscommandsetsthe30sprotocolalarmthresholdofPP .
CommandMode
Globalcongurationmode
Syntax
setprotocol-protectalarmport<portlist>{protocol-name}<0-18000>
ParameterDescription
ParameterDescription
<portlist>Portlist.
{protocol-name}
Protocolnames,includingSTP ,LACP,IP,arp-request,arp-reply,
802.1x,IGMP ,GM,GVRP ,VBAS,DHCP ,EOAM,PPPoE+,
loopdetect,DHCPv6,MLD,IPv6,LLDP ,UDLD,CFM,and
unknown.
<0-18000>30salarmthresholdvalue.0indicatesthatalarmsneveroccur.
Example
ThefollowingexamplesetsthealarmthresholdoftheSTPprotocolprotectiononport1
to3000:
zte(cfg)#setprotocol-protectalarmport1stp3000
4.32.4setprotocol-protectlimit
Purpose
ThiscommandsetstheratelimitvalueoftheprotocolpacketsenttotheCPUthatPP
allowspersecond.
CommandMode
Globalcongurationmode
Syntax
setprotocol-protectlimit{group-name}<0-800>
4-494
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential