Zte ZXR10 5250-52TC - Debug Protocol Dhcp Client State Ipport; Debug Protocol Dhcp Relay Enable;Disable

Chapter4ServiceConguration
Defaults
Bydefault,thedebugfunctionoftheDHCPclientisdisabled.
4.43.3debugprotocoldhcpclientstateipport
Function
ThiscommandshowsthestatusofanipportoftheDHCPclient.
Mode
Globalconguration
Syntax
debugprotocoldhcpclientstateipport<0-63>
Parameters
ParameterDescription
<0-63>IDoftheipportoftheDHCPmodule.
4.43.4debugprotocoldhcprelayenable/disable
Function
ThiscommandenablesordisablesthedebugfunctionoftheDHCPRelaymodule.
Mode
Globalconguration
Syntax
debugprotocoldhcprelay{enable|disable}
Parameters
ParameterDescription
enableEnablesthedebugfunctionoftheDHCPRelaymodule.
disableDisablesthedebugfunctionoftheDHCPRelaymodule.
Defaults
Bydefault,thedebugfunctionoftheDHCPRelaymoduleisdisabled.
4-575
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential