Zte ZXR10 5250-52TC - Clear Egress-Acl Basic

ZXR105250SeriesCommandReference
Syntax
rule<1-500>{permit|deny}{<source-ipaddr><sip-mask>|any}[fragment]
ParameterDescription
ParameterDescription
<1-500>Rulenumber.
permitIftheconditionmatches,accessispermitted.
denyIftheconditionmatches,accessisdenied.
<source-ipaddr>
IPaddressofthesourcenetworkorhosttransmittingpackets.Itis
a32-bitIPaddressexpressedindotteddecimalnotation.
<sip-mask>
Sourcemaskusedforsources.Itisa32-bitIPaddressexpressed
indotteddecimalnotation.
any
Theanykeywordisusedastheabbreviationofthesource0.0.0.0
andthesourcemask0.0.0.0.
fragment
Thisruleisonlyvalidforfragmentmessages.Fornon-fragment
messages,thisruleisignored.
Guidelines
TherulecanmatchIPv4packetswiththespeciedsourceIPaddresses,anysourceIP
address,orIPfragmentelds.
4.13.47clearegress-aclbasic
Purpose
ThiscommandclearsabasicegressACLinstance.
CommandMode
Globalcongurationmode
Syntax
clearegress-aclbasicnumber<400-499>
ParameterDescription
ParameterDescription
<400-499>NumberofthebasicegressACLinstance
4-260
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential