Zte ZXR10 5250-52TC - Set Poe Port Priority

ZXR105250SeriesCommandReference
CommandMode
Globalcongurationmode
Syntax
setpoeport<portlist>pd-max-power{15.4|4.0|7.0|ext.18|ext.27|ext.30}
ParameterDescription
ParameterDescription
<portlist>Portlist
15.4|4.0|7.0StandardpowerinWatts
ext.18|ext.27|ext.30ExtendedpowerinWatts
Guidelines
IfthemaximumpowerofaportisconguredandthePDpowerconnectedtotheportis
largerthanthevaluecongured,powersupplytotheportmaybeaffected.
Default
Standardpower(30W).
Example
Thefollowingexamplesetsthemaximumpowerofports1,3and5to30W.
zte(cfg)#setpoeport1/1,1/3,1/5pd-max-powerext.30
4.3.3setpoeportpriority
Purpose
ThiscommandsetsPOEprioritiesforports.
CommandMode
Globalcongurationmode
Syntax
setpoeport<portlist>priority{critical|high|low}
ParameterDescription
ParameterDescription
<portlist>Portlist
criticalHighestpriority
4-64
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential