Zte ZXR10 5250-52TC - Set Dhcp Client Broadcast-Flag Enable;Disable; Show Dhcp Client

Chapter4ServiceConguration
Syntax
setdhcpclient{enable|disable}
ParameterDescription
ParameterDescription
enable
EnablestheDHCPclientfunction.Layer-3portscanapplyforIP
addressesautomatically.
disableDisablestheDHCPclientfunction.
Default
TheDHCPclientfunctionisdisabled.
4.25.22setdhcpclientbroadcast-flagenable/disable
Purpose
ThiscommandsetswhethertheDHCPservertakesabroadcastprocedurewhenreplying
toapacket.
CommandMode
Globalcongurationmode
Syntax
setdhcpclientbroadcast-flag{enable|disable}
ParameterDescription
ParameterDescription
enable
TheDHCPservertakesabroadcastprocedurewhenreplying
toapacket.
disable
TheDHCPserverdoesnottakeabroadcastprocedurewhen
replyingtoapacket.
Default
TheDHCPserverdoesnottakeabroadcastprocedurewhenreplyingtoapacket.
4.25.23showdhcpclient
Purpose
ThiscommandshowsthecongurationoftheDHCPclient.
4-445
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential