Zte ZXR10 5250-52TC - Show Port Statistics; Show Port Utilization

ZXR105250SeriesCommandReference
PortEnable:enabledMediaType:1000BaseT
Duplex:autoSpeed:auto
DefaultVlanId:100FlowControl:disabled
Multicastfilter:defaultSecurity:disabled
SpeedAdvertise:maxSpeedMdix:auto
AcceptFrame:allJumbo:disabled
ProtocolVlan:disabledEgressTPID:0x8100
PortVlanJump:disabled
PortStatus:
PortClass:802.3Link:up
Duplex:fullSpeed:1000Mbps
UpTime:0years0days0hours19minutes14seconds
RecentDownTime:0years0days0hours0minutes2seconds
4.2.17showportstatistics
Purpose
Thiscommandshowsportstatistics.
CommandMode
Allcongurationmodes
Syntax
showport<portlist>statistics[1min_unit|5min_unit]
ParameterDescription
ParameterDescription
<portlist>Portlist
1min_unitTrafcstatisticsin1minute
5min_unitTrafcstatisticsin5minutes
Guidelines
Thecommandwithoutthe1min_unitand5min_unitparametersindicatesthatall
statisticsofthedesiredportswillbedisplayed.
4.2.18showportutilization
Purpose
Thiscommandshowsthebandwidthutilizationofports.
4-56
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential