Zte ZXR10 5250-52TC - Set Syslog Level

ZXR105250SeriesCommandReference
Syntax
setsyslogmodule{all|arp-inspection|commandlog|dhcp|radius|AAA}{enable|disable}
ParameterDescription
ParameterDescription
all
Enablesordisablesthesyslogfunctionofallmodules.Bydefault,
thefunctionisdisabled.
arp-inspection
EnablesordisablesthesyslogfunctionoftheDAImodules.By
default,thefunctionisdisabled.
commandlog
Enablesordisablesthesyslogfunctionofcommandlogmodule.
Bydefault,thefunctionisdisabled.
dhcp
EnablesordisablesthesyslogfunctionoftheDHCPmodules.By
default,thefunctionisdisabled.
radius
EnablesordisablesthesyslogfunctionofRADIUSmodules.By
default,thefunctionisdisabled.
AAAEnablesordisablesthesyslogfunctionofAAAmodules.
enableEnablesthesyslogfunction.
disableDisablesthesyslogfunction.
Example
Thefollowingexampleenablesthesyslogfunctionofallmodules:
zte(cfg)#setsyslogmoduleallenable
4.22.2setsysloglevel
Purpose
Thiscommandsetsthelevelofsysloginformation.
CommandMode
Globalcongurationmode
Syntax
setsysloglevel{emergencies|alerts|critical|errors|warnings|notifications|informational
|debugging}
ParameterDescription
ParameterDescription
emergenciesLevel1,emergenterror
4-414
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential