Zte ZXR10 5250-52TC - Set Qos Traffic-Limit Fe-Port Data-Rate; Set Qos Traffic-Limit Fe-Port Packet-Rate

Chapter4ServiceConguration
4.14.15setqostraffic-limitfe-portdata-rate
Purpose
ThiscommandsetstheingressratelimitforanFEport.
CommandMode
Globalcongurationmode
Syntax
setqostraffic-limitfe-port<1-24>{data-rate<0-100000>|disable}
ParameterDescription
ParameterDescription
<1-24>
NumberofanFEport.Differentdeviceshavedifferentport
numberranges.Inthesyntax,the5250–28TCdeviceisused
asanexample.
<0-100000>
Ingressratelimit,inKbpsorKpps.Thecongurationgranularity
is8Kbpsor1Kpps.Theunitandgranularityvarywithglobal
modecongurations.
disableDisablestheportratelimitfunction.
Guidelines
Whengloballyconguringtheingressratelimit,youcanselecteitherbyte-basedor
packet-basedratelimit.Fordifferentratelimitmodes,theratelimitunitandgranularity
aredifferent.
Example
Thefollowingexamplesetstheingressratelimitto100kbps(or100kpps)forport2(the
unitisdeterminedbyingressratelimitmodeconguredinglobalcongurationmode):
zte(cfg)#setqostraffic-limitfe-port2data-rate100
4.14.16setqostraffic-limitfe-portpacket-rate
Purpose
ThiscommandsetstheingressratelimitforanFEport.
CommandMode
Globalcongurationmode
4-313
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential