Zte ZXR10 5250-52TC - Set Qos Traffic-Limit Xge-Port Packet-Rate; Set Qos Traffic-Limit Port Percent

Chapter4ServiceConguration
4.14.20setqostraffic-limitxge-portpacket-rate
Purpose
Thiscommandsetstheingressratelimitfora10GBport.
CommandMode
Globalcongurationmode
Syntax
setqostraffic-limitxge-port<2/1-2/4>{packet-rate<0-14881000>[packet-lenth<64-10240
>]|disable}
ParameterDescription
ParameterDescription
<2/1-2/4>
Numberofa10GBport.Differentdeviceshavedifferentport
numberranges.Inthesyntax,the5250–52TCdeviceisused
asanexample.
<0-148810>Numberofpacketslimitedontheingressport.
<64-10240>Lengthofpacketslimitedontheingressport.
disableDisablestheportratelimitfunction.
Guidelines
Thiscommandsetstheingressratelimitfunctioninaccordancewiththisformula:ingress
ratelimit=numberofpackets*lengthofpackets.Thecongurationisvalidonlyiningress
ratelimitglobalbytemode.
Example
Thefollowingexamplesetstheingressratelimitto10000ppsandpacketlengthto64
bytesforport2/1:
zte(cfg)#setqostraffic-limitxge-port2/1packet-rate10000packet-lenth64
4.14.21setqostraffic-limitportpercent
Purpose
Thiscommandsetsthepercentoftheingressratelimittothephysicalbandwidthfora
port.
CommandMode
Globalcongurationmode
4-317
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential