Chapter 5 Dashboard
ZyWALL ATP Series User’s Guide
106
5.2.1 Device Information Screen
The Device Information screen displays Zyxel Device’s system and model name, serial number, MAC
address and firmware version shown in the below screen.
Figure 86 Dashboard > Device Information (Example)
This table describes the fields in the above screen.
Zone This field displays the zone to which the interface is currently assigned.
IP Address/
Mask
This field displays the current IP address and subnet mask assigned to the interface. If the
interface is a member of an active virtual router, this field displays the IP address it is currently
using. This is either the static IP address of the interface (if it is the master) or the management
IP address (if it is a backup).
Table 17 Dashboard (continued)
LABEL DESCRIPTION
Table 18 Dashboard > Device Information
LABEL DESCRIPTION
System Name This field displays the name used to identify the Zyxel Device on any network. Click
the link and open the Host Name screen where you can edit and make changes to
the system and domain name.
Serial Number This field displays the serial number of this Zyxel Device. The serial number is used for
device tracking and control.
MAC Address Range This field displays the MAC addresses used by the Zyxel Device. Each physical port
has one MAC address. The first MAC address is assigned to physical port 1, the
second MAC address is assigned to physical port 2, and so on.
Firmware Version This field displays the version number and date of the firmware the Zyxel Device is
currently running. Click the link to open the Firmware Package screen where you
can upload firmware.
To Next Page
Loading...
