ZyXEL Communications ATP200 - Edit System Log Settings

Chapter 38 Log and Report
ZyWALL ATP Series User’s Guide
752
Figure 517 Configuration > Log & Report > Log Setting
The following table describes the labels in this screen.
38.3.2 Edit System Log Settings
The Log Settings Edit screen controls the detailed settings for each log in the system log (which includes
the email profiles). Go to the Log Settings Summary screen (see Section 38.3.1 on page 751), and click
the system log Edit icon.
Table 334 Configuration > Log & Report > Log Setting
LABEL DESCRIPTION
Edit Double-click an entry or select it and click Edit to open a screen where you can modify it.
Activate To turn on an entry, select it and click Activate.
Inactivate To turn off an entry, select it and click Inactivate.
# This field is a sequential value, and it is not associated with a specific log.
Status The activate (light bulb) icon is lit when the entry is active and dimmed when the entry is inactive.
Name This field displays the type of log setting entry (system log, logs stored on a USB storage device
connected to the Zyxel Device, or one of the remote servers).
Log Format This field displays the format of the log.
Internal - system log; you can view the log on the View Log tab.
VRPT/Syslog - Zyxel’s Vantage Report, syslog-compatible format.
CEF/Syslog - Common Event Format, syslog-compatible format.
Summary This field is a summary of the settings for each log. Please see Section 38.3.2 on page 752 for more
information.
Log Category
Settings
Click this button to open the Log Category Settings Edit screen.
Apply Click this button to save your changes (activate and deactivate logs) and make them take effect.