Chapter 6 Monitor
ZyWALL ATP Series User’s Guide
170
6.33 The Botnet Filter Screen
Click Monitor > Security Statistics > Botnet Filter to display the following screen. This screen displays anti-
botnet statistics.
Figure 140 Monitor > Security Statistics > Botnet Filter
The following table describes the labels in this screen.
Table 65 Monitor > Security Statistics > Botnet Filter
LABEL DESCRIPTION
Collect Statistics Select this check box to have the Zyxel Device collect anti-botnet statistics.
The collection starting time displays after you click Apply. All of the statistics in this screen
are for the time period starting at the time displayed here. The format is year, month, day
and hour, minute, second. All of the statistics are erased if you restart the Zyxel Device or
click Flush Data. Collecting starts over and a new collection start time displays.
Apply Click Apply to save your changes back to the Zyxel Device.
Reset Click Reset to return the screen to its last-saved settings.
Refresh Click this button to update the report display.
Flush Data Click this button to discard all of the screen’s statistics and update the report display.
IP Scanned This field displays the total number of the IP addresses that are scanned.
IP Hit Count This field displays the total number of the hit counts on the scanned IP addresses.
URL Scanned This field displays the total number of the URLs that are scanned.
URL Hit Count This field displays the total number of the hit counts on the scanned URLs.
Time This field displays the date and time the entry was created.
Source IP This field displays the source IP address of traffic that you want to trace.
Botnet IP This field displays the IP address of a botnet command and control (C&C) server.
Botnet URL This field displays the URL of an infected website or a botnet C&C server.
Threat Category This field displays the category of the entry.
To Next Page
Loading...
