Chapter 4 Quick Setup Wizards
ZyWALL ATP Series User’s Guide
99
4.4.9 VPN Settings for Configuration Provisioning Advanced Wizard- Finish
Now the rule is configured on the Zyxel Device. The Phase 1 rule settings appear in the VPN > IPSec VPN
> VPN Gateway screen and the Phase 2 rule settings appear in the VPN > IPSec VPN > VPN Connection
screen. Enter the IP address of the Zyxel Device in the Zyxel Device IPSec VPN Client to get all these VPN
settings automatically from the Zyxel Device.
Figure 79 VPN for Configuration Provisioning Advanced Wizard: Finish
Click Close to exit the wizard.
4.5 VPN Settings for L2TP VPN Settings Wizard
Use VPN Settings for L2TP VPN Settings to set up an L2TP VPN rule. Click Configuration > Quick Setup >
VPN Setup and select VPN Settings for L2TP VPN Settings to see the following screen.
To Next Page
Loading...
