ZyXEL Communications ATP200 - The Traffic Statistics Screen

Chapter 6 Monitor
ZyWALL ATP Series User’s Guide
121
6.4 The Traffic Statistics Screen
Click Monitor > System Status > Traffic Statistics to display the Traffic Statistics screen. This screen provides
basic information about the following for example:
• Most-visited Web sites and the number of times each one was visited. This count may not be accurate
in some cases because the Zyxel Device counts HTTP GET packets. Please see Table 29 on page 122
for more information.
• Most-used protocols or service ports and the amount of traffic on each one
• LAN IP with heaviest traffic and how much traffic has been sent to and from each one
You use the Traffic Statistics screen to tell the Zyxel Device when to start and when to stop collecting
information for these reports. You cannot schedule data collection; you have to start and stop it
manually in the Traffic Statistics screen.
Services This field lists which services the interface provides to the network. Examples include DHCP
relay, DHCP server, DDNS, RIP, and OSPF. This field displays n/a if the interface does not provide
any services to the network.
Action Use this field to get or to update the IP address for the interface. Click Renew to send a new
DHCP request to a DHCP server. Click Connect to try to connect a PPPoE/PPTP interface. If the
interface cannot use one of these ways to get or to update its IP address, this field displays n/a.
Interface Statistics
This table provides packet statistics for each interface.
Refresh Click this button to update the information in the screen.
Name This field displays the name of each interface. If there is a Expand icon (plus-sign) next to the
name, click this to look at the statistics for virtual interfaces on top of this interface.
Status This field displays the current status of the interface.
• Down - The interface is not connected.
• Speed / Duplex - The interface is connected. This field displays the port speed and duplex
setting (Full or Half).
This field displays Connected and the accumulated connection time (hh:mm:ss) when the PPP
interface is connected.
TxPkts This field displays the number of packets transmitted from the Zyxel Device on the interface
since it was last connected.
RxPkts This field displays the number of packets received by the Zyxel Device on the interface since it
was last connected.
Tx B/s This field displays the transmission speed, in bytes per second, on the interface in the one-
second interval before the screen updated.
Rx B/s This field displays the reception speed, in bytes per second, on the interface in the one-second
interval before the screen updated.
Table 28 Monitor > System Status > Interface Summary
LABEL DESCRIPTION