Chapter 6 Monitor
ZyWALL ATP Series User’s Guide
156
The following table describes the labels in this screen.
6.25 The IPSec Screen
You can use the IPSec Monitor screen to display and to manage active IPSec SAs. To access this screen,
click Monitor > VPN Monitor > IPSec. The following screen appears. Click a column’s heading cell to sort
the table entries by that column’s criteria. Click the heading cell again to reverse the sort order.
Figure 125 Monitor > VPN Monitor > IPSec
Table 55 Monitor > Wireless > Detected Device
LABEL DESCRIPTION
Mark as Rogue
AP
Click this button to mark the selected AP as a rogue AP. A rogue AP can be contained in the
Configuration > Wireless > MON Mode screen.
Mark as Friendly
AP
Click this button to mark the selected AP as a friendly AP. For more on managing friendly APs,
see the Configuration > Wireless > MON Mode screen.
# This is the station’s index number in this list.
Status This indicates the detected device’s status.
Device This indicates the detected device’s network type (such as infrastructure or ad-hoc).
Role This indicates the detected device’s role (such as friendly or rogue).
MAC Address This indicates the detected device’s MAC address.
SSID Name This indicates the detected device’s SSID.
Channel ID This indicates the detected device’s channel ID.
802.11 Mode This indicates the 802.11 mode (a/b/g/n) transmitted by the detected device.
Security This indicates the encryption method (if any) used by the detected device.
Description This displays the detected device’s description. For more on managing friendly and rogue APs,
see the Configuration > Wireless > MON Mode screen.
Last Seen This indicates the last time the device was detected by the Zyxel Device.
Refresh Click this to refresh the items displayed on this page.
To Next Page
Loading...
