Chapter 4 Quick Setup Wizards
ZyWALL ATP Series User’s Guide
92
Figure 73 VPN for Configuration Provisioning Express Wizard: Summary
• Rule Name: Identifies the VPN gateway policy.
• Secure Gateway: Any displays in this field because it is not configurable in this wizard. It allows
incoming connections from the Zyxel Device IPSec VPN Client.
• Pre-Shared Key: VPN tunnel password. It identifies a communicating party during a phase 1 IKE
negotiation.
• Local Policy: (Static) IP address and subnet mask of the computers on the network behind your Zyxel
Device that can be accessed using the tunnel.
• Remote Policy: Any displays in this field because it is not configurable in this wizard.
• The Configuration for Secure Gateway displays the configuration that the Zyxel Device IPSec VPN
Client will get from the Zyxel Device.
• Click Save to save the VPN rule.
4.4.4 VPN Settings for Configuration Provisioning Express Wizard - Finish
Now the rule is configured on the Zyxel Device. The Phase 1 rule settings appear in the Configuration >
VPN > IPSec VPN > VPN Gateway screen and the Phase 2 rule settings appear in the Configuration > VPN
> IPSec VPN > VPN Connection screen. Enter the IP address of the Zyxel Device in the Zyxel Device IPSec
VPN Client to get all these VPN settings automatically from the Zyxel Device.
To Next Page
Loading...
