ZyXEL Communications ATP200 - Add;Edit Rogue;Friendly List

Chapter 8 Wireless
ZyWALL ATP Series User’s Guide
199
8.4.1 Add/Edit Rogue/Friendly List
Select an AP and click the Edit button in the Configuration > Wireless > MON Mode table to display this
screen.
Figure 158 Configuration > Wireless > MON Mode > Add/Edit Rogue/Friendly
Each field is described in the following table.
Apply Click Apply to save your changes back to the Zyxel Device.
Reset Click Reset to return the screen to its last-saved settings.
Table 82 Configuration > Wireless > MON Mode (continued)
LABEL DESCRIPTION
Table 83 Configuration > Wireless > MON Mode > Add/Edit Rogue/Friendly
LABEL DESCRIPTION
MAC Enter the MAC address of the AP you want to add to the list. A MAC address is a unique hardware
identifier in the following hexadecimal format: xx:xx:xx:xx:xx:xx where xx is a hexadecimal number
separated by colons.
Description Enter up to 60 characters for the AP’s description. Spaces and underscores are allowed.
Role Select either Rogue AP or Friendly AP for the AP’s role.
OK Click OK to save your changes back to the Zyxel Device.
Cancel Click Cancel to close the window with changes unsaved.