ZyXEL Communications LTE7460-M608 - Page 15

Chapter 2 Introducing the Web Configurator
LTE7460-M608 User’s Guide
15
Figure 7 Navigation Panel
The following table describes all the screens in the Web Configurator.
Table 3 Navigation Panel
MAIN MENU SUBMENU FUNCTION
Home Display connection mode, wireless LAN information and the LTE7460-
M608’s traffic statistics.
Use this screen to access the wizard.
Internet Internet Status Configure the WAN settings on the LTE7460-M608 for Internet access.
Internet Settings Use this to enable data roaming on the LTE7460-M608.
Select when and the type of network to which you want to connect.
PIN Settings Configure the PIN code when PIN code authentication is enabled.
Change the PIN code for the inserted SIM card.
APN Configuration Configure user-defined connection profiles.
Network Selection Display available Public Land Mobile Networks and select a preferred
network for roaming.
Data Usage/ Statistic Specify limiting the amount of the package data and view the LTE7460-
M608’s traffic statistics.
Home Network LAN IP Configure the management IP address for the LTE7460-M608 LAN
interface.
DHCP Enable the DHCP server on the LTE7460-M608.
Configure static DHCP series.
Static Route Use this to add up to 15 static routes on the LTE7460-M608.
UPnP Enable the UPnP settings on the LTE7460-M608.
Connected Devices View current clients information of network clients connected to the
LTE7460-M608.
Networking Operating Mode Use this to choose the operating mode for your LTE7460-M608.
TR069 Configure TR069 for an administator to use an Auto Configuration Server
(ACS) to manage the LTE7460-M608.
DNS Settings Configure the DNS settings on the LTE7460-M608.
Firewall Configure IPv4/Port, IPv6/Port, URL filtering rules, DoS attack, ALG, ULG,
and IP port forwarding rules.
DDNS Settings Configure the Dynamic DNS settings on the LTE7460-M608.
VPN Pass Through Use this to allow computers to establish an outbound VPN service.
Certificate
Management
Use this to upload and download certificate files to authenticate servers
and clients in your network.
Bandwidth
Management
Use this to control traffic on your LTE7460-M608.
Remote
Management
Use this to allow addresses outside your LAN to access the LTE7460-M608.
ICMP Use this screen to enable WAN and LAN ping respond.