Chapter 5 Internet
LTE7460-M608 User’s Guide
32
The following table describes the labels in this screen.
Table 6 Internet > Internet Status
LABEL DESCRIPTION
Internet Status
Internet Status (IPv4) This shows the IPv4 mobile data connection status.
IP Address (IPv4) This field displays the current IPv4 address assigned to the WAN interface.
Connection Time (IPv4) This field displays how long you connect to the Internet through IPv4.
Internet Status (IPv6) This shows the IPv6 mobile data connection status.
IP Address (IPv6) This field displays the current IPv6 address assigned to the WAN interface.
Connection Time (IPv6) This field displays how long you connect to the Internet through IPv6.
Advanced Internet Information
Network Provider This shows the name of the service provider for the mobile network to which the
LTE7460-M608 is connected.
Network Type This shows the mobile network type (such as LTE, UMTS, GSM, HSPA+, etc.) to which
the LTE7460-M608 is connecting.
MCC This displays the Mobile Country Code (MCC), which is used to identify the country
of a mobile subscriber.
MNC This displays the Mobile Network Code (MNC), which is used in combination with
MCC to identify the public land mobile network (PLMN) of a mobile subscriber.
Band This displays the network type and the frequency band used by the mobile network
to which the LTE7460-M608 is connecting.
EARFCN/UARFCN/ARFCN This displays the channel used by the mobile network to which the LTE7460-M608 is
connecting.
LAC This displays the 2-octet Location Area Code (LAC), which is used to identify a
location area within a PLMN.
TAC This displays the Tracking Area Code (TAC), which is used to identify the country of a
mobile subscriber.
CID This displays the Cell ID (CID), which is a unique number used to identify the Base
Transceiver Station to which the LTE7460-M608 is connecting.
Ec/Io This displays the ratio (in dB) of the received energy per chip and the interference
level.
PCI This shows the Physical Cell ID(PCI), which are queries and replies among the
LTE7460-M608 and the mobile network it is connecting to.
RSCP This displays the Received Signal Code Power (RSCP) which measures the power on
the channel used by the LTE7460-M608.
RSRP This displays the Reference Signal Receive Power (RSRP), which is the average
received power of all Resource Elements (RE) that carry cell-specific Reference
Signals (RS) within the specified bandwidth.
RSRQ This displays the Reference Signal Received Quality (RSRQ), which is the ratio of RSRP
to the E-UTRA carrier RSSI and indicates the quality of the received reference signal.
SNR This displays the Signal-to-Noise-Ratio (SNR), which indicates a ratio of signal power
to noise power.
RSSI This displays the received signal strength indicator (RSSI), that is, the received signal
strength in dBm.
To Next Page
Loading...
