Chapter 5 Internet
LTE7460-M608 User’s Guide
37
Figure 21 Internet > Network Selection
The following table describes the labels in this screen.
Table 10 Internet > Network Selection
LABEL DESCRIPTION
PLMN Mode
Select PLMN Mode Select Auto to have the LTE7460-M608 automatically connect to the first available
mobile network.
Selected Network Name This shows the ISP the LTE7460-M608 is currently connected to.
Selected Network Type This shows the type of network the LTE7460-M608 is using when connected to the ISP.
Scan Timestamp This shows the last time the LTE7460-M608 scanned for ISPs on its surroundings.
Check the radio button so the LTE7460-M608 connects to this ISP.
Status This shows Current to show the ISP the LTE7460-M608 is currently connected to.
This shows Forbidden to indicate the LTE7460-M608 can not connect to this ISP.
This shows Available to indicate an available ISP your LTE7460-M608 can connect to.
Network Name This shows the ISP name.
Network Type This shows the type of network the ISP provides.
Scan Click Scan for the LTE7460-M608 to check for available ISPs on its surroundings.
Apply Click Apply to save your changes back to the LTE7460-M608.
Reset Click Reset to reload the previous configuration for this screen.
To Next Page
Loading...
