ZyXEL Communications UAG Series - Page 153

Chapter 27 Firewall
UAG CLI Reference Guide
153
firewall profile_name {zone_object|Device} delete
<1..5000>
Removes a direction specific through-Device rule or
to-Device rule.
<1..5000>: the index number in a direction specific
firewall rule list.
firewall profile_name {zone_object|Device} flush Removes all direction specific through-Device rule or
to-Device rules.
firewall profile_name {zone_object|Device} insert
rule_number
Enters the firewall sub-command mode to add a
direction specific through-Device rule or to-Device
rule before the specified rule number. See Table 88 on
page 154 for the sub-commands.
firewall profile_name {zone_object|Device} move
rule_number to rule_number
Moves a direction specific through-Device rule or to-
Device rule to the number that you specified.
[no] firewall activate Enables the firewall on the UAG. The
no command
disables the firewall.
firewall append Enters the firewall sub-command mode to add a
global firewall rule to the end of the global rule list.
See Table 88 on page 154 for the sub-commands.
firewall default-rule action {allow | deny | reject} { no
log | log [alert] }
Sets how the firewall handles packets that do not
match any other firewall rule.
firewall delete rule_number Removes a firewall rule.
firewall flush Removes all firewall rules.
firewall insert rule_number Enters the firewall sub-command mode to add a
firewall rule before the specified rule number. See
Table 88 on page 154 for the sub-commands.
firewall move rule_number to rule_number Moves a firewall rule to the number that you specified.
show connlimit max-per-host Displays the highest number of sessions that the UAG
will permit a host to have at one time.
show firewall Displays all firewall settings.
show firewall rule_number Displays a firewall rule’s settings.
show firewall profile_name {zone_object|Device} Displays all firewall rules settings for the specified
packet direction.
show firewall profile_name {zone_object|Device}
rule_number
Displays a specified firewall rule’s settings for the
specified packet direction.
show firewall status Displays whether or not the firewall is active, whether
or not asymmetrical route topology is allowed, and
the default firewall rule’s configuration.
show firewall block_rules Displays all the firewall rules that deny access.
show firewall any Device Shows all the to-Device firewall rules.
Table 87 Command Summary: Firewall (continued)
COMMAND DESCRIPTION