ZyXEL Communications UAG Series - Content Filter URL Cache Commands

Chapter 36 Content Filtering
UAG CLI Reference Guide
195
36.8 Content Filter URL Cache Commands
The following table lists the commands that you can use to view and configure your UAG’s URL
caching. You can configure how long a categorized web site address remains in the as well as view
those web site addresses to which access has been allowed or blocked based on the responses from
the external content filtering server. The UAG only queries the external content filtering database
for sites not found in the cache.
[no] content-filter profile filtering_profile url
url-server
Sets a content filtering profile to use the external web
filtering service. The
no command has the profile not use
the external web filtering service.
[no] content-filter service-timeout service_timeout Sets how many seconds the UAG is to wait for a response
from the external content filtering server. The
no command
clears the setting.
[no] content-filter profile filtering_profile
commtouch-url category {category_name}
Sets a CommTouch content filtering profile to check for
specific web site categories. The
no command has the
profile not check for the specified categories.
content-filter profile filtering_profile commtouch-
url match-unsafe {block | log | pass}
Sets the action for attempted access to web pages that
match the CommTouch profile’s selected unsafe categories.
Block access, log access, or allow access.
content-filter profile filtering_profile commtouch-
url match {block | log | warn | pass}
Sets the action for attempted access to web pages that
match the CommTouch profile’s selected managed
categories.
Block access, allow and log access, display a warning
message before allowing access, or allow access.
content-filter profile filtering_profile commtouch-
url offline {block | log | warn | pass}
Sets the action for attempted access to web pages if the
CommTouch external content filtering database is
unavailable.
Block access, allow and log access, display a warning
message before allowing access, or allow access.
content-filter profile filtering_profile commtouch-
url unrate {block | log | warn | pass}
Sets the action for attempted access to web pages that the
CommTouch external web filtering service has not
categorized.
Block access, allow and log access, display a warning
message before allowing access, or allow access.
no content-filter profile filtering_profile
commtouch-url match-unsafe {log}
Has the UAG not log attempted access to web pages that
match the CommTouch profile’s selected unsafe categories.
no content-filter profile filtering_profile
commtouch-url match {log}
Has the UAG not log attempted access to web pages that
match the CommTouch profile’s selected managed
categories.
no content-filter profile filtering_profile
commtouch-url offline {log}
Has the UAG not log access to web pages if the
CommTouch external content filtering database is
unavailable.
no content-filter profile filtering_profile
commtouch-url unrate {log}
Has the UAG not log access to web pages that the
CommTouch external web filtering service has not
categorized.
show content-filter profile [filtering_profile] Displays the specified content filtering profile’s settings or
the settings of all them if you don’t specify one.
Table 113 content-filter Filtering Profile Commands Summary (continued)
COMMAND DESCRIPTION