ZyXEL Communications UAG Series - Aaa Group Server Command Example

Chapter 41 AAA Server
UAG CLI Reference Guide
220
41.2.8 aaa group server Command Example
The following example creates a RADIUS server group with two members and sets the secret key to
“12345678” and the timeout to 100 seconds. Then this example also shows how to view the
RADIUS group settings.
aaa group server radius group-name Enter the sub-command mode.
[no] case-sensitive Specify whether or not the server checks the username case. Set this to be
the same as the server’s behavior.
[no] server description
description
Sets the descriptive information for the RADIUS server group. You can use
up to 60 printable ASCII characters. The
no command clears the setting.
[no] server group-attribute <1-
255>
Sets the value of an attribute that the UAG is used to determine to which
group a user belongs.
This attribute’s value is called a group identifier. You can add ext-group-
user user objects to identify groups based on different group identifier
values.
For example, you could configure attributes 1,10 and 100 and create a ext-
group-user user object for each of them. The
no command clears the
setting.
[no] server host radius_server Enter the IP address (in dotted decimal notation) or the domain name of a
RADIUS server to add to this server group. The
no command clears this
setting.
[no] server key secret Sets a password (up to 15 alphanumeric characters) as the key to be shared
between the RADIUS server(s) and the UAG. The
no command clears this
setting.
[no] server timeout time Sets the search timeout period (in seconds). Enter a number between 1 and
300. The
no command clears this setting and set this to the default setting
of 5 seconds.
Table 135 aaa group server radius Commands (continued)
COMMAND DESCRIPTION
Router# configure terminal
Router(config)# aaa group server radius RADIUSGroup1
Router(group-server-radius)# server host 192.168.1.100 auth-port 1812
Router(group-server-radius)# server host 172.16.12.100 auth-port 1812
Router(group-server-radius)# server key 12345678
Router(group-server-radius)# server timeout 100
Router(group-server-radius)# exit
Router(config)# show aaa group server radius RADIUSGroup1
key : 12345678
timeout : 100
description :
group attribute : 11
No. Host Member Auth. Port
==========================================================================
1 192.168.1.100 1812
2 172.16.12.100 1812