UAG CLI Reference Guide 243
CHAPTER 48
System
This chapter provides information on the commands that correspond to what you can configure in
the system screens.
48.1 System Overview
Use these commands to configure general UAG information, the system time and the console port
connection speed for a terminal emulation program. They also allow you to configure DNS settings
and determine which services/protocols can access which UAG zones (if any) from which
computers.
48.2 Customizing the WWW Login Page
Use these commands to customize the Web Configurator login screen. You can also customize the
page that displays after an access user logs into the Web Configurator to access network services
like the Internet. See Chapter 37 on page 200 for more on access user accounts.
The following figures identify the parts you can customize in the login and access pages.
Figure 22 Login Page Customization
Logo
Title
Message
Background
(color of all text)
Note Message
(last line of text)
To Next Page
Loading...
