ZyXEL Communications UAG Series - Page 230

Chapter 44 ISP Accounts
UAG CLI Reference Guide
230
[no] server ip Sets the PPTP server for the specified PPTP ISP account. The no command
clears the server name.
[no] encryption {nomppe | mppe-40
| mppe-128}
Sets the encryption for the specified PPTP ISP account. The
no command
sets the encryption to nomppe.
[no] connection-id connection_id Sets the connection ID for the specified PPTP ISP account. The
no command
clears the connection ID.
connection_id: You can use up to 31 alphanumeric characters, underscores
(_), dashes (-), and colons (:).
Table 140 PPPoE and PPTP ISP Account Commands (continued)
COMMAND DESCRIPTION