Chapter 4 The Web Configurator
XGS1930 Series User’s Guide
43
After clicking Next, the Summary screen appears.
Figure 29 Wizard > Basic > Step 4 Summary
Each field is described in the following table.
Next Click Next to show the next screen.
Cancel Click Cancel to exit this screen without saving.
Table 9 Wizard > Basic > Step 4 Summary
LABEL DESCRIPTION
Setup IP
Host Name This field displays a host name.
IP Interface This field displays whether the WAN interface is using a DHCP IP address or a static IP
address.
VID This field displays the VLAN ID.
IP Address The Switch needs an IP address for it to be managed over the network.
IP Subnet Mask The subnet mask specifies the network number portion of an IP address.
Default Gateway Type the IP address of the default outgoing gateway in dotted decimal notation, for
example 192.168.1.254.
DNS Server DNS (Domain Name System) is for mapping a domain name to its corresponding IP address
and vice versa. Enter a domain name server IP address in order to be able to use a domain
name instead of an IP address.
Change administrator's password and activate SNMP
New Password This field displays asterisks when a new password has been created.
SNMP This field displays whether the Switch acts as an SNMP agent.
Version This field displays the SNMP version for the Switch.
Get Community This field displays the Get Community string.
Table 8 Wizard > Basic > Step 3 Link Aggregation
LABEL DESCRIPTION
To Next Page
Loading...
