Chapter 13 Spanning Tree Protocol
XS1930 Series User’s Guide
145
Figure 106 Advanced Application > Spanning Tree Protocol > MSTP
The following table describes the labels in this screen.
Table 65 Advanced Application > Spanning Tree Protocol > MSTP
LABEL DESCRIPTION
Status Click Status to display the MSTP Status screen (see Figure 108 on page 149).
Port Click Port to display the MSTP Port screen (see Figure 107 on page 147).
Active Select this to activate MSTP on the Switch. Clear this to disable MSTP on the Switch.
Note: You must also activate Multiple Spanning Tree in the Advanced Application >
Spanning Tree Protocol > Configuration screen to enable MSTP on the Switch.
To Next Page
Loading...
